Architect / Interior Designer
Judge colour, fine texture, direction and backing with a close-view sample or mock-up.
← All product directions
JA-A002
Art MeshA dense art-mesh direction for close-view interiors where colour, layered lines and surface movement carry more value than transparency.
Selection logic
Choose the structure by the installed result—not by a catalogue image.
JA-A002 is evaluated as an interior finish and fabrication detail. Colour, orientation, backing, panel seams, edge concealment and lighting should be reviewed together before the order is defined.
Closely woven stainless-steel elements form a dense linear surface. The pattern changes with viewing angle and reflected light; the backing colour and the way the edges are held strongly influence the finished appearance.
Approved visual references
Review the surface at full scale, close range and at the project interface
These images support product discussion. Colour, scale, edges and finish still require confirmation through the project sample and approved order record.
Buyer decision map
What must be resolved before this model becomes an order-ready project item
- 01
Colour and lighting environment
- 02
Pattern direction and panel orientation
- 03
Backing colour and substrate visibility
- 04
Panel seams and edge concealment
- 05
Touch, cleaning and maintenance conditions
- 06
Cut-outs and integration with other finishes
Value by buyer role
The same mesh must answer different project risks
Millworker / Contractor
Resolve substrate, edge concealment, panel seams, corners and fixing access.
Procurement
Freeze the colour sample, orientation and finished panel build-up before production release.
Reference specification
Enterprise technical-sheet values, kept separate from final project approval
These values identify the recorded reference configuration. They are not a substitute for the approved quotation, sample, drawing and order specification.
- Material
- Stainless steel reference configurationEnterprise sheet reference
- Reference cross-code
- T311Enterprise sheet reference
- Open area
- 5% reference configurationEnterprise sheet reference
- Thickness
- 1 mm reference configurationEnterprise sheet reference
- Reference weight
- 2.5 kg/m²Enterprise sheet reference
- Maximum width
- 2000 mm reference; project review requiredEnterprise sheet reference
- Wire / element geometry
- Project-specific confirmation requiredOpen project field
- Pitch
- Project-specific confirmation requiredOpen project field
- Finish / colour
- Project-specific confirmation requiredOpen project field
- Edge option
- Project-specific confirmation requiredOpen project field
- Final size
- Project-specific confirmation requiredOpen project field
From inquiry to approval
Give our engineering team enough information to protect the design intent
01 / Drawing inputs
- 01
Finished panel dimensions
- 02
Pattern direction
- 03
Substrate and backing colour
- 04
Edge and corner detail
- 05
Cut-outs and interface locations
- 06
Lighting and finish reference
02 / Sample checks
- 01
Colour under project lighting
- 02
Directional appearance
- 03
Backing visibility
- 04
Edge concealment
- 05
Cleaning and touch response
03 / Controlled order release
After the model, configuration, finish, edges, dimensions and responsibilities are approved, the order record carries those requirements into production planning, inspection, packing and delivery coordination.
Project questions
What buyers usually need to confirm
Can JA-A002 be ordered directly from the reference specification?
The listed values come from the enterprise technical sheet and describe a reference configuration. Final material, dimensions, finish, edges, interfaces and order scope must be confirmed against the current project.
What should be submitted for an engineering review?
Send dimensioned drawings, application, panel schedule, supporting construction, edge or fixing intent, finish requirement, site conditions and the required approval date.
Why is a physical sample still required?
A sample confirms the actual weave, scale, colour, reflection, edge workmanship and handling expectation. For framed or tensioned work, a representative assembly or mock-up may be needed.
Start with evidence
Send the drawing, application and approval target.
We will review product fit, missing project inputs, sample requirements and the path to an order-ready specification.