Architect / Designer
Confirm the visual target, pattern direction, openness, finish, module and interfaces with adjacent materials.
← All product directions
JA-E005
Elevator and WallJA-E005 is a recorded Elevator and Wall direction. Selection starts with the intended application, visual openness, panel format, finish, edge condition and supporting construction.
Selection logic
Choose the structure by the installed result—not by a catalogue image.
Decorative interior surfaces reviewed around pattern, finish consistency, backing, edges and panel integration. The model record is available for project discussion; final technical values and the exact product photograph remain subject to enterprise-sheet and drawing review.
This family is coordinated as a defined panel or integrated surface. Panel size, orientation, perimeter retention, flatness, joints and fixing access affect the installed result.
Buyer decision map
What must be resolved before this model becomes an order-ready project item
- 01
Application and installed viewing distance
- 02
Required openness, screening and visual density
- 03
Panel size, direction and division strategy
- 04
Support, edge and fixing conditions
- 05
Material and finish approval reference
- 06
Site environment, access and delivery sequence
Value by buyer role
The same mesh must answer different project risks
Engineer / Contractor
Define panel dimensions, loads where applicable, support locations, edge retention, tolerances and installation access.
Procurement
Link the approved sample, drawing revision, finish reference, quantity, packaging and delivery sequence to one order record.
Project specification
Confirm the configuration against the drawings and approval reference
Project-specific specification. Final dimensions, material, finish and installation details are confirmed against the project requirements and approved documents.
- Application
- Confirm location, environment and viewing conditionsProject input
- Geometry
- Confirm opening, direction, panel or roll format and edge conditionDrawing input
- Material & finish
- Confirm against environment and approved physical referenceSample input
- Installation
- Confirm support, fixing interface, access and responsibility boundaryInterface input
From inquiry to approval
Give our project team enough information to protect the design intent
01 / Drawing inputs
- 01
Dimensioned elevation or panel schedule
- 02
Application and model reference
- 03
Pattern direction and face orientation
- 04
Supporting construction and fixing zones
- 05
Material and finish requirement
- 06
Required sample and approval date
02 / Sample checks
- 01
Actual weave and visual scale
- 02
Openness and screening at viewing distance
- 03
Colour, gloss and reflected light
- 04
Edge and connection workmanship
- 05
Handling, protection and installation expectation
03 / Approved order basis
After the model, configuration, finish, edges, dimensions and responsibilities are approved, the order record carries those requirements into supplier coordination, inspection, packing and delivery review.
Continue the project review
Connect the product to its application, engineering decision and evidence path
Review the installed context
Check exposure, viewing distance, interface, access and maintenance before confirming the product direction.
Review related application →Define the approval path
Drawings, sample references, responsibilities and order inputs must move together.
Review system definition →Read the specification guide
Use the product structure and project conditions to prepare a clearer specification.
Read the guide →Review permitted project records
Project references are shown only within their verified and approved disclosure scope.
Review project evidence →Project questions
What buyers usually need to confirm
Can JA-E005 be ordered without project review?
Final dimensions, material, finish, edges, interfaces and order scope are confirmed against the current project requirements, approved sample and order documents.
What should be submitted for an engineering review?
Send dimensioned drawings, application, panel schedule, supporting construction, edge or fixing intent, finish requirement, site conditions and the required approval date.
Why is a physical sample still required?
A sample confirms the actual weave, scale, colour, reflection, edge workmanship and handling expectation. For framed or tensioned work, a representative assembly or mock-up may be needed.
Start with evidence
Send the drawing, application and approval target.
We will review product fit, missing project inputs, sample requirements and the path to an order-ready specification.